2011-2013 Land Cruiser · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE REAR LIGHT ASSEMBLY LH

  1. E244786E01
    Put protective tape around the rear light assembly LH.
    Text in Illustration 
    *1
    Protective Tape

  1. Remove the 3 nuts.

  1. Detach the clip and remove the rear light assembly LH.

  1. Disconnect the connector.


2. REMOVE REAR LIGHT GASKET LH
  1. Remove the rear light gasket LH from the rear light lens and body LH.


3. REMOVE REAR LIGHT COVER

  1. E244787
    Detach the 2 claws and guide and remove the rear light cover from the rear light lens and body LH.


4. REMOVE BACK UP LIGHT BULB

  1. E244788
    Detach the clamp.

  1. Turn the rear light socket and wire LH in the direction indicated by the arrow in the illustration and remove the socket and back up light bulb.

  1. Remove the back up light bulb from the rear light socket and wire LH.


5. REMOVE REAR LIGHT SOCKET AND WIRE LH

  1. E244789
    Disconnect the connector and remove the rear light socket and wire LH from the rear light lens and body LH.

← REMOVAL (Sep 2011 – Dec 2011)DISASSEMBLY (Sep 2011 – Dec 2011) →