INSTALLATION
Removal / installation · Vehicles built from Sep 2011
- HINT:
- Use the same procedures for LHD and RHD vehicles.
- The procedures listed below are for LHD vehicles.
- Use the same procedures for LHD and RHD vehicles.
| 1. INSTALL SEAT MEMORY SWITCH |
![]() ![]() |
Install the seat memory switch the screw.
Connect the connector.
| 2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH |
Connect the connector.
Connect the front door lock remote control cable and front door inside locking cable to the front door inside handle sub-assembly.

Attach the 4 claws and 13 clips to install the front door trim board sub-assembly.

Install the 3 screws.
| 3. INSTALL DOOR ASSIST GRIP COVER LH |
Attach the 8 claws to install the door assist grip cover to the door trim panel.

| 4. INSTALL FRONT DOOR ARMREST BASE PANEL ASSEMBLY LH |
Connect the connector.
Attach the 5 claws to install the armrest base panel.

| 5. INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH |
Attach the 4 claws to install the bezel.

| 6. INSTALL FRONT LOWER DOOR FRAME BRACKET GARNISH LH |
Attach the clip and claw, and install the front door lower frame bracket garnish.


