2011-2013 Land Cruiser · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built from Sep 2011

HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.


1. REMOVE REAR NO. 2 SEAT ASSEMBLY LH
  1. Remove the rear No. 2 seat assembly LH (Click here).


2. REMOVE SEAT ADJUSTER BOLT COVER

B181818E02
  1. Using a screwdriver, detach the 2 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape


3. REMOVE NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH

B181819
  1. Remove the screw and release handle.


4. REMOVE RECLINING ADJUSTER COVER LH

B181820E01
  1. Remove the screw.

  1. Detach the 3 claws in the order shown in the illustration, and then remove the cover.


5. REMOVE RECLINING ADJUSTER COVER RH

B181821E01
  1. Remove the screw.

  1. Detach the 5 claws in the order shown in the illustration, and then remove the cover.


6. REMOVE REAR SEAT REAR BRACKET COVER REAR
  1. Detach the 2 claws and cover.


7. REMOVE REAR NO. 3 SEAT LEG COVER LH

  1. B181822
    Using a screwdriver, remove the spring of the seat stay ball-joint.

  1. Disconnect the seat stay.

  1. B181823
    Remove the 2 screws and cover.


8. REMOVE NO. 2 SEAT LEG COVER NO. 2

  1. B182643
    Remove the screw and seat leg cover.


9. REMOVE 3RD SEAT LINK SUB-ASSEMBLY LH

B181825
  1. Remove the bolt, nut and seat link.


10. REMOVE REAR SEAT CUSHION UNDER COVER LH

  1. B181827
    Detach the 16 claws.

  1. B258453
    Remove the 7 screws and cover.


11. REMOVE NO. 3 SEAT FRONT BRACKET COVER LH

B181829
  1. Detach the 4 claws and remove the cover.


12. REMOVE NO. 3 SEAT LEG COVER NO. 2

B181830
  1. Remove the 2 screws.

  1. Detach the 4 claws and remove the cover.


13. REMOVE REAR SEAT INNER BELT SUB-ASSEMBLY (for LH Side)

B180631E01
  1. Remove the nut and belt.

    HINT:
    The rear No. 2 seat inner belt is fixed with the same nut as the rear seat inner belt. Therefore, it becomes disconnected when the nut is removed.


14. REMOVE REAR SEAT OUTER BELT SUB-ASSEMBLY (for RH Side)

B180633E01
  1. Remove the nut and belt.

    HINT:
    The rear No. 2 seat inner belt is fixed with the same nut as the rear seat outer belt. Therefore, it becomes disconnected when the nut is removed.


15. REMOVE REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY

B184524E02
  1. Remove the 2 belts.

← COMPONENTS (from Sep 2011)INSTALLATION (from Sep 2011) →