REMOVAL
Removal / installation · Vehicles built from Sep 2011
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover) |
![]() ![]() |
Detach the 4 claws and remove the No. 2 instrument panel under cover.
| 2. REMOVE CLEARANCE WARNING ECU |
![]() ![]() |
Disconnect the connector.
Remove the 2 screws and clearance warning ECU.



