INSTALLATION
Removal / installation · Vehicles built from Sep 2011
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL PARKING ASSIST ECU |
![]() ![]() |
Install the parking assist ECU to the blower unit with the 3 screws.
- NOTICE:
- Avoid any impact to the parking assist ECU.
- Do not drop the ECU. If it is dropped, replace it with a new one.
- Avoid any impact to the parking assist ECU.
Connect the connector.
| 2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover) |
![]() ![]() |
Attach the 4 claws to install the No. 2 instrument panel under cover.



