INSTALLATION
Removal / installation · Vehicles built from Sep 2011
- HINT:
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
| 1. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY |


Attach the 2 claws.
Install the console box with the 4 bolts and 2 screws.
| 2. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY |
Connect the connectors and 2 clamps.

Attach the 8 claws to install the end panel.
| 3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
Connect the connectors.

Attach the 14 claws to install the console panel.
| 4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY |
Attach the 4 claws to install the box.

| 5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
Attach the 9 claws to install the panel.

| 6. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
Connect the connectors.

Attach the 7 claws to install the panel.
| 7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
Install the shift lever knob and twist it in the direction indicated by the arrow.


| 8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH |
Attach the 7 claws to install the panel pad.

Install the screw.
Install the clip.
| 9. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION |
Attach the 7 claws to install the panel cushion.

| 10. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH |
Connect the connectors and 2 clamps.

Attach the 8 claws to install the panel pad.
Install the screw.
Install the clip.
| 11. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION |
Attach the 7 claws to install the panel cushion.

