REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- Use the same procedures for LHD and RHD vehicles.
- The procedures listed below are for LHD vehicles.
- Use the same procedures for LHD and RHD vehicles.
| 1. REMOVE UPPER RADIATOR SUPPORT SEAL |
for Gasoline Engine:
Remove the upper radiator support seal (Click here).
for Diesel Engine:
Remove the upper radiator support seal (Click here).
| 2. REMOVE RADIATOR GRILLE ASSEMBLY |
![]() ![]() |
Put protective tape around the radiator grille.
Remove the 3 screws.
Detach the 2 clips and 8 claws, and remove the radiator grille.
| 3. REMOVE HOOD LOCK CONTROL CABLE COVER |
![]() ![]() |
Remove the 3 screws.
Detach the claw and remove the cover.
| 4. REMOVE HOOD LOCK ASSEMBLY |
Remove the hood lock nut cap.

Remove the 2 bolts and nut.
Disconnect the connector.
Disconnect the hood lock control cable and remove the hood lock.



