2011-2013 Land Cruiser · Service Manual Suspension

DISPOSAL

Removal / installation · Vehicles built from Sep 2011


1. DISPOSE OF SUSPENSION CONTROL PUMP ACCUMULATOR ASSEMBLY

C174594E01
  1. Place the accumulator in a vise and saw a hole between A and B shown in the illustration using a saw to discharge the gas inside.

    CAUTION:
    1. Before discharging the gas, loosen the bleeder plug to bleed high pressure oil.
    2. The gas is colorless, odorless and harmless.
    3. Saw a hole while covering the saw with a cloth because chips may fly up.

← INSTALLATION (from Sep 2011)COMPONENTS (from Sep 2011) →