2011-2013 Land Cruiser · Service Manual Suspension

DISPOSAL

Removal / installation · Vehicles built from Sep 2011


1. DISPOSE OF FRONT NO. 1 SUSPENSION CONTROL ACCUMULATOR ASSEMBLY LH

C174038E01
  1. Place the accumulator in a vise and saw a hole between A and B shown in the illustration using a saw to discharge the gas inside.

    CAUTION:
    1. The gas is colorless, odorless and harmless.
    2. Saw a hole while covering the saw with a cloth because chips may fly up.


2. DISPOSE OF FRONT NO. 2 SUSPENSION CONTROL ACCUMULATOR

C174039E01
  1. Place the accumulator in a vise and saw a hole between A and B shown in the illustration using a saw to discharge the gas inside.

    CAUTION:
    1. The gas is colorless, odorless and harmless.
    2. Saw a hole while covering the saw with a cloth because chips may fly up.


3. DISPOSE OF FRONT NO. 3 SUSPENSION CONTROL ACCUMULATOR

C174071E01
  1. Place the gas camber in a vise and saw a hole in the hatched area shown in the illustration using a saw to discharge the gas inside.

    CAUTION:
    1. The gas is colorless, odorless and harmless.
    2. Saw a hole while covering the saw with a cloth because chips may fly up.

← INSTALLATION (from Sep 2011)COMPONENTS (from Sep 2011) →