2011-2013 Land Cruiser · Service Manual Drivetrain

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT TRANSFER POSITION SWITCH

  1. C172380E01
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    2 (2WD) - 4 (GND2)
    H4 Position
    100 kΩ or higher
    L4 Position
    Below 1 Ω

    If the result is not as specified, replace the transfer position switch.

← REMOVAL (from Sep 2011)INSTALLATION (from Sep 2011) →