2011-2013 Land Cruiser · Service Manual Drivetrain

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT BACK-UP LIGHT SWITCH ASSEMBLY

C180053E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    On (pushed)
    Below 1 Ω
    1 - 2
    Off (released)
    10 kΩ or higher

    If the result is not as specified, replace the back-up light switch assembly.

← REMOVAL (from Sep 2011)INSTALLATION (from Sep 2011) →