2011-2013 Land Cruiser · Service Manual Drivetrain

DISASSEMBLY

Removal / installation · Vehicles built from Sep 2011


1. REMOVE TRANSMISSION OIL PUMP COVER OIL SEAL

C178035
  1. Using a screwdriver, pry out the oil pump cover oil seal.

    NOTICE:
    Be careful not to damage the oil seal and oil pump cover contact surfaces.

    HINT:
    Tape the screwdriver tip before use.


2. REMOVE MANUAL TRANSMISSION OIL PUMP DRIVE ROTOR

C171304
  1. Remove the oil pump drive rotor.


3. REMOVE MANUAL TRANSMISSION OIL PUMP DRIVEN ROTOR

C171305
  1. Remove the oil pump driven rotor.


4. REMOVE NO. 1 MANUAL TRANSMISSION OIL PUMP COVER PLUG

C171298
  1. Using a hexagon wrench, remove the oil pump cover plug.


5. REMOVE TRANSMISSION OIL PUMP COVER COMPRESSION SPRING

C171306
  1. Using a magnet hand, remove the compression spring.


6. REMOVE TRANSMISSION OIL PUMP COVER BALL

C171307
  1. Using a magnet hand, remove the ball.


7. REMOVE OIL PUMP RELIEF VALVE SEAT

C171308
  1. Using a magnet hand, remove the valve seat.


8. REMOVE MANUAL TRANSMISSION OIL PUMP COVER O-RING
  1. Remove the O-ring from the valve seat.

← REMOVAL (from Sep 2011)INSPECTION (from Sep 2011) →