REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2.
REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY
|
 |
Detach the 8 claws and remove the opening cover.
| 3.
REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
|
 |
Place protective tape as shown in the illustration.
Text in Illustration
*1
|
Protective Tape
|
Using a moulding remover, detach the 6 claws.
Disconnect the connector and remove the No. 3 instrument panel register.
| 4.
REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
|
 |
Place protective tape as shown in the illustration.
Text in Illustration
*1
|
Protective Tape
|
Using a moulding remover, detach the 6 claws.
Disconnect the connector and remove the No. 4 instrument panel register.
| 5.
REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET |
 |
- Remove the 2 screws and 2 bolts.
- Pull the radio receiver to detach the 10 claws on the backside of the radio receiver.
Disconnect the connectors and remove the radio receiver.
| 6.
REMOVE NO. 1 RADIO BRACKET |
 |
- Remove the 3 bolts and bracket.
| 7.
REMOVE NO. 2 RADIO BRACKET |
 |
- Remove the 3 bolts and bracket.
| 8.
REMOVE CLOCK ASSEMBLY
|
 |
- Remove the 2 screws and clock.
| 9.
REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY
|
 |
- Detach the 2 claws and remove the hazard warning switch.