2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSTALLATION

Removal / installation · Vehicles built Sep 2011 – Dec 2011


1. INSTALL FUEL SENDER GAUGE ASSEMBLY

  1. A175048E01
    Set the sender gauge to the fuel sub-tank. Then slide the sender gauge downward to install it.

  1. A181433
    Connect the fuel sender gauge connector.


2. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
  1. for Single Tank Type:
    Install the fuel suction with pump and gauge tube assembly (Click here).

  1. for Double Tank Type:
    Install the fuel suction with pump and gauge tube assembly (Click here).

← INSPECTION (Sep 2011 – Dec 2011)COMPONENTS (Sep 2011 – Dec 2011) →