INSTALLATION
Removal / installation · Vehicles built from Sep 2011
| 1. INSTALL DIFFERENTIAL LOCK SWITCH |
Attach the 2 claws to install the switch.

| 2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL |
Connect the connectors.
for Automatic Air Conditioning System:

Attach the 2 claws to install the room temperature sensor.
Attach the 2 claws to connect the 2 control cables.

w/ Driver Side Knee Airbag:
Attach the 16 claws to install the lower No. 1 instrument panel finish panel.
Install the 2 bolts.


w/o Driver Side Knee Airbag:
Attach the 9 claws to install the lower No. 1 instrument panel finish panel.
Install the 2 bolts.


Attach the 2 claws to close the hole cover.

| 3. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION |
Attach the 7 claws to install the panel cushion.

| 4. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH |
Connect the connectors and 2 clamps.

Attach the 8 claws to install the panel pad.
Install the screw.
Install the clip.
| 5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
![]() ![]() |
Connect the connectors.
Attach the 3 claws to install the No. 1 instrument panel under cover.
Install the 2 screws.
| 6. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Attach the 2 claws to install the No. 2 instrument cluster finish panel garnish.


Text in Illustration *A
w/ Entry and Start System
*B
w/o Entry and Start System
| 7. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
![]() ![]() |
Attach the 3 claws to install the No. 1 instrument cluster finish panel garnish.
| 8. INSTALL INSTRUMENT SIDE PANEL LH |
![]() ![]() |
Attach the 6 claws to install the instrument side panel.



