2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT CENTER STOP LIGHT ASSEMBLY

  1. E233838E02
    Apply battery voltage to the connector, and check the LED illumination condition.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 1 (B)
    Battery negative (-) → Terminal 2 (E)
    LED illuminates

    If the result is not as specified, replace the center stop light assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (Center Stop Light Assembly)

← REMOVAL (from Sep 2011)INSTALLATION (from Sep 2011) →