REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- NOTICE:
- Set to recirculation mode before removing the air conditioning filter.
- HINT:
- Use the same procedures for the LHD vehicle and RHD vehicle.
- The procedures listed below are for the LHD vehicle.
- Use the same procedures for the LHD vehicle and RHD vehicle.
| 1. REMOVE AIR CONDITIONING UNIT |
Remove the air conditioning unit (Click here).
| 2. REMOVE BLOWER ASSEMBLY |
Remove the screw.
Disconnect the connector and clamp.
Detach the claw and remove the blower unit.


