DISASSEMBLY
Removal / installation · Vehicles built from Sep 2011
- HINT:
- Use the same procedures for the LHD vehicle and RHD vehicle.
- The procedures listed below are for the LHD vehicle.
- Use the same procedures for the LHD vehicle and RHD vehicle.
| 1. REMOVE DAMPER SERVO SUB-ASSEMBLY |
![]() ![]() |
Remove the 3 screws and damper servo.
| 2. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY |
![]() ![]() |
Remove the 3 screws and motor.
| 3. REMOVE AIR FILTER |
![]() ![]() |
Detach the 2 claws and remove the filter.




