2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

REMOVAL

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

B183763
  1. Detach the 8 claws and remove the opening cover.


3. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

B180307E02
  1. Place protective tape as shown in the illustration.

    Text in Illustration 
    *1
    Protective Tape

  1. Using a moulding remover, detach the 6 claws.

  1. Disconnect the connector and remove the No. 3 instrument panel register.


4. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

B182866
  1. Connect the connector.

  1. Attach the 6 claws to install the No. 4 instrument panel register.


5. REMOVE MULTI-DISPLAY ASSEMBLY

  1. B181495
    Remove the 2 screws and 2 bolts.

  1. B183745
    Pull the radio receiver to detach the 2 clips and 6 claws on the backside of the display.

  1. Disconnect the connectors and remove the display.


6. REMOVE NO. 1 RADIO RECEIVER BRACKET

  1. B181497
    Remove the 3 bolts and bracket.


7. REMOVE NO. 2 RADIO RECEIVER BRACKET

  1. B181496
    Remove the 3 bolts and bracket.

← COMPONENTS (from Jan 2012)REMOVAL (from Jan 2012) →