2011-2013 Land Cruiser · Service Manual Vehicle Exterior

REASSEMBLY

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL HEADLIGHT LEVELING MOTOR LH

  1. E155827E01
    Insert the headlight leveling motor LH in the direction indicated by the arrow (1) in the illustration.

  1. Turn the aiming screw in the direction indicated by the arrow (2) in the illustration to connect the shaft.

  1. Turn the headlight leveling motor LH in the direction indicated by the arrow (3) in the illustration to install it.


2. INSTALL DISCHARGE HEADLIGHT BULB

  1. E156929
    Lock the set spring as shown in the illustration to install the discharge headlight bulb.

    NOTICE:
    Do not touch the glass part of the bulb.

  1. E156930
    Turn the headlight control ECU socket in the direction indicated by the arrow to connect the socket.

  1. E156931
    Turn the back cover in the direction indicated by the arrow to install it.


3. INSTALL CLEARANCE LIGHT BULB

  1. E155830
    Turn the bulb in the direction indicated by the arrow to install it.


4. INSTALL FRONT TURN SIGNAL LIGHT BULB

  1. E157697
    Turn the bulb in the direction indicated by the arrow to install it.


5. INSTALL NO. 1 HEADLIGHT BULB

  1. E155832
    Turn the bulb in the direction indicated by the arrow to install it.

← ADJUSTMENT (from Jan 2012)REASSEMBLY (from Jan 2012) →