2011-2013 Land Cruiser · Service Manual Vehicle Exterior

REPAIR

Removal / installation · Vehicles built Sep 2011 – Dec 2011

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH

HINT:
  1. If the installation area of the headlight is damaged, use the supply retainer for low-cost repair.
  2. Ensure that the headlight is not damaged.

  1. E155836
    Cut off the part shaded in the illustration and smooth with sandpaper.

    NOTICE:
    After cutting off the part, place the headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

  1. E155837
    Install the headlight protector retainer with the screw.


2. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER LH

HINT:
  1. If the installation area of the headlight is damaged, use the supply retainer for low-cost repair.
  2. Ensure that the headlight is not damaged.

  1. E155834
    Cut off the part shaded in the illustration and smooth with sandpaper.

    NOTICE:
    After cutting off the part, place the headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

  1. E155835
    Install the headlight protector retainer with the screw.

← INSTALLATION (from Jan 2012)COMPONENTS (Sep 2011 – Dec 2011) →