REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2.
REMOVE BATTERY |
 |
Remove the nut and stay.
Remove the battery.
| 3.
REMOVE DISCHARGE HEADLIGHT BULB |
 |
- Turn the back cover in the direction indicated by the arrow and remove it.
- Turn the headlight control ECU socket in the direction indicated by the arrow and disconnect it.
- Release the set spring lock as shown in the illustration and remove the bulb.
- NOTICE:
- Do not touch the glass part of the bulb.