INSTALLATION
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
INSTALL AIRBAG CUT-OFF SWITCH |
 |
- Attach the 2 claws to install the switch.
| 2.
INSTALL INSTRUMENT SIDE PANEL RH
|
 |
Attach the 7 claws and 4 clips to install the scuff plate.
| 3.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 4.
CHECK SRS WARNING LIGHT |
 |
Check the SRS warning light (Click here).