REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
|
 |
- HINT:
- Use the same procedures described for the LH side.
| 2.
REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
|
 |
Remove the 3 bolts and screw.
Turn the clip indicated by the arrow in the illustration to remove the fender splash shield.
| 3.
REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
|
 |
Remove the 10 bolts and engine under cover.
| 4.
REMOVE V-BANK COVER
|
 |
- Remove the 2 cap nuts and V-bank cover.
| 5.
REMOVE NO. 2 AIR CLEANER HOSE
|
 |
- Loosen the 2 hose clamps and remove the air cleaner hose.
| 6.
REMOVE FAN & GENERATOR V BELT
|
 |
- While releasing the belt tension by turning the belt tensioner counterclockwise, remove the fan and generator V belt from the belt tensioner.
| 7.
DRAIN POWER STEERING FLUID |
|
| 8.
REMOVE POWER STEERING OIL PRESSURE SWITCH |
 |
- Disconnect the oil pressure switch connector.
Using a 19 mm deep socket wrench, remove the oil pressure switch.