2011-2013 Land Cruiser · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Sep 2011


1. REMOVE RAIN SENSOR COVER

  1. Slide the No. 2 cover in the direction of the arrow labeled (1).

    E160054E01

  1. Pull the stopper in the direction of the arrow labeled (2) to remove the No. 2 cover.


2. REMOVE RAIN SENSOR

  1. E159301E01
    Release the stopper by pulling it down, and separate the rain sensor.

  1. Disconnect the connector and remove the rain sensor.

  1. When replacing the rain sensor tape.

    1. Remove the rain sensor tape.

← ON-VEHICLE INSPECTION (from Sep 2011)INSTALLATION (from Sep 2011) →