2011-2013 Land Cruiser · Service Manual Vehicle Exterior

REASSEMBLY

Removal / installation · Vehicles built from Sep 2011


1. INSTALL REAR ROOF RACK LEG LH

B188310
  1. Install the rear roof rack leg and lower roof rack frame gusset with the 2 nuts and 3 bolts.

    Torque:
    8.3 N*m{ 85 kgf*cm , 73 in.*lbf }


2. INSTALL REAR ROOF RACK LEG RH

HINT:
Use the same procedures described for the LH side.


3. INSTALL CENTER ROOF RACK SUPPORT LH

B188309
  1. Install the center roof rack leg and lower roof rack frame gusset with the 2 nuts and 3 bolts.

    Torque:
    8.3 N*m{ 85 kgf*cm , 73 in.*lbf }


4. INSTALL CENTER ROOF RACK SUPPORT RH

HINT:
Use the same procedures described for the LH side.


5. INSTALL FRONT ROOF RACK LEG LH

B188308
  1. Install the front roof rack leg and lower roof rack frame gusset with the 2 nuts and 3 bolts.

    Torque:
    8.3 N*m{ 85 kgf*cm , 73 in.*lbf }


6. INSTALL FRONT ROOF RACK LEG RH

HINT:
Use the same procedures described for the LH side.


7. INSTALL UPPER NO. 1 ROOF RACK SIDE RAIL FRAME

C175784
  1. Install the 2 roof rack side frame supports to the upper No. 1 roof rack side rail frame and lower roof rack side rail frame with the 4 bolts and 4 screws.

    Torque:
    8.3 N*m{ 85 kgf*cm , 73 in.*lbf }


8. INSTALL FRONT UPPER ROOF RACK FRAME SUB-ASSEMBLY

C175787
  1. Install the front roof rack bracket to the lower No. 2 roof rack frame sub-assembly and front upper roof rack frame sub-assembly with the 2 bolts.

    Torque:
    8.3 N*m{ 85 kgf*cm , 73 in.*lbf }


9. INSTALL NO. 1 ROOF RACK END COVER

C175786

HINT:
Use the same procedure for the other 3 No. 1 No. 1 roof rack end covers.

  1. Install the No. 1 roof rack end cover with the 2 nuts and 6 bolts.

    Torque:
    8.3 N*m{ 85 kgf*cm , 73 in.*lbf }


10. INSTALL NO. 1 ROOF RACK SUPPORT PLATE

C175785E02
  1. Install the No. 1 roof rack support plate with the 9 nuts and 9 bolts.

    Torque:
    8.3 N*m{ 85 kgf*cm , 73 in.*lbf }

  1. B188299E02
    Install the 9 nuts and 9 bolts.

    Torque:
    8.3 N*m{ 85 kgf*cm , 73 in.*lbf }


11. INSTALL NO. 1 ROOF RACK DECK BOARD

C175788

HINT:
Use the same procedure for the other 4 No. 1 roof rack deck boards.

  1. Install the No. 1 roof rack deck board with the 5 nuts and 5 bolts.

    Torque:
    8.3 N*m{ 85 kgf*cm , 73 in.*lbf }

← DISASSEMBLY (from Sep 2011)INSTALLATION (from Sep 2011) →