2011-2013 Land Cruiser · Service Manual Vehicle Interior

DISASSEMBLY

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. REMOVE NO. 2 AIR OUTLET GRILLE ASSEMBLY (w/ Rear Air Conditioning System)

B182435

HINT:
Use the same procedures to remove the air outlet grille on the other side.

  1. Detach 6 claws and remove the air outlet grille.


2. REMOVE NO. 1 AIR OUTLET GRILLE ASSEMBLY (w/ Rear Air Conditioning System)

HINT:
Use the same procedures described for the No. 2 air outlet grille.


3. REMOVE NO. 1 ROOF SILENCER PAD

B185348
  1. Remove the roof silencer pad.


4. REMOVE NO. 2 ROOF SILENCER PAD

B185349
  1. Remove the roof silencer pad.


5. REMOVE NO. 3 ROOF SILENCER PAD

B185350
  1. Remove the roof silencer pad.


6. REMOVE NO. 4 ROOF SILENCER PAD

B182432
  1. Remove the roof silencer pad.


7. REMOVE NO. 1 ROOF WIRE
  1. Turn the visor connectors approximately 90° clockwise and remove them from the roof headlining.

  1. Remove the 6 pieces of tape from the roof headlining.

  1. Detach each clamp, and remove the roof wire and washer hose.

  1. Remove the double-sided tape remaining on the headlining.

    B188731E01


8. REMOVE ANTENNA CORD SUB-ASSEMBLY

  1. w/o Sliding Roof:

    1. Detach the 2 clamps and remove the antenna from the notch on the rear of the roof headlining.

      B181735

    2. Remove the antenna cord from the roof headlining.

    3. Remove the double-sided tape from the roof headlining.

  1. w/ Sliding Roof:

    1. Detach the 4 clamps and remove the antenna from the notch on the rear of the roof headlining.

      B181736

    2. Remove the antenna cord from the roof headlining.

    3. Remove the double-sided tape from the roof headlining.

← DISASSEMBLY (Sep 2011 – Dec 2011)REASSEMBLY (Sep 2011 – Dec 2011) →