INSTALLATION
Removal / installation · Vehicles built from Sep 2011
| 1.
INSTALL STABILIZER LINK SUB-ASSEMBLY LH |
 |
- Install the stabilizer link to the stabilizer bar with the bolt and nut.
-
Torque:
- 48 N*m{
489 kgf*cm
, 35 ft.*lbf
}
- Install the 2 retainers, 2 cushions and bracket with the nut.
-
Torque:
- 12 N*m{
122 kgf*cm
, 9 ft.*lbf
}
| 2.
INSTALL STABILIZER LINK SUB-ASSEMBLY RH |
 |
- HINT:
- Use the same procedures described for the LH side.
| 3.
INSTALL REAR STABILIZER BAR SUB-ASSEMBLY |
 |
Install the 2 rear stabilizer bushes to the rear stabilizer bar.
Install the rear stabilizer bar.
| 4.
INSTALL REAR STABILIZER BRACKET LH |
 |
- Install the stabilizer bar bracket with the 2 bolts.
-
Torque:
- 56 N*m{
571 kgf*cm
, 41 ft.*lbf
}
| 5.
INSTALL REAR STABILIZER BRACKET RH |
 |
- HINT:
- Use the same procedures described for the LH side.
| 6.
CONNECT REAR STABILIZER END BRACKET LH |
 |
- Connect the stabilizer end bracket with the 2 bolts.
-
Torque:
- 36 N*m{
367 kgf*cm
, 27 ft.*lbf
}
| 7.
CONNECT REAR STABILIZER END BRACKET RH |
 |
- HINT:
- Use the same procedures described for the LH side.
| 8.
INSTALL REAR WHEEL |
 |
-
Torque:
- for aluminum wheel:
- 131 N*m{
1336 kgf*cm
, 97 ft.*lbf
}
- for steel wheel:
- 209 N*m{
2131 kgf*cm
, 154 ft.*lbf
}