SERVICE DATA
Specifications · Vehicles built Sep 2011 – Dec 2011
| Fuel pressure |
Standard fuel pressure |
at idle |
265 to 304 kPa (2.7 to 3.1 kgf/cm2, 38 to 44 psi) |
|
| remains for 5 minutes after engine has stopped |
147kPa (1.5 kgf/cm2, 21 psi) or more |
|||
| Fuel injector |
Standard resistance |
Tester Connection |
Condition |
Specified Condition |
| 1 - 2 |
20°C (68°F) |
11.6 to 12.4 Ω |
||
| Injection volume |
56 to 69 cm3 (3.4 to 4.2 cu. in.) per 15 seconds |
|||
| Difference between each cylinder |
13 cm3 (0.8 cu. in.) or less |
|||
| Fuel leakage |
1 drop or less per 12 minutes |
|||
| Fuel pump (for Single Tank Type) |
Standard resistance |
Tester Connection |
Condition |
Specified Condition |
| 1 - 2 |
20°C (68°F) |
0.2 to 3.0 Ω |
||
| Fuel pump (for Double Tank Type) |
Standard resistance |
Tester Connection |
Condition |
Specified Condition |
| 1 - 2 |
20°C (68°F) |
0.2 to 3.0 Ω |
||
| Fuel sender gauge assembly |
Standard resistance |
Tester Connection |
Condition |
Specified Condition |
| 1 - 2 |
Float level is F (upper) |
13.5 to 16.5 Ω |
||
| Float level is E (lower) |
405.5 to 414.5 Ω |
|||
| Fuel sender gauge assembly (for Fuel Sub Tank) |
Standard resistance |
Tester Connection |
Condition |
Specified Condition |
| 2 - 3 |
Float level is F (upper) |
12 to 18 Ω |
||
| Float level is E (lower) |
405 to 415 Ω |
|||