2011-2013 Land Cruiser · Service Manual General

SERVICE DATA

Specifications · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

Fuel injector (w/o DPF)
Standard resistance
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68°F)
0.85 to 1.05 Ω
Fuel supply pump
Suction control valve
Standard resistance
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68°F)
1.9 to 2.3 Ω
Standard thrust clearance
0.05 to 0.30 mm (0.00197 to 0.0118 in.)
Common rail
Fuel pressure sensor
Standard resistance
Tester Connection
Condition
Specified Condition
1 - 2
25°C (77°F)
16.4 kΩ or less
2 - 3
25°C (77°F)
3 kΩ or less
Pressure discharge valve (w/ DPF)
Standard resistance
1 - 2
25°C (68°F)
0.96 to 1.16 Ω
Fuel filter
Level warning switch
Standard resistance
Tester Connection
Condition
Specified Condition
1 - 2
Float upper end position
Below 1 Ω
1 - 2
Float lower end position
1 MΩ or higher
Clogging switch
Standard resistance
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68°F)
Below 1 Ω
Fuel temperature sensor
Standard resistance
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68°F)
2.32 to 2.59 Ω
Fuel pump (for Double Tank Type)
Standard resistance
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68°F)
0.2 to 3.0 Ω
Fuel sender gauge assembly
Standard resistance
Tester Connection
Condition
Specified Condition
1 - 2
Float level is F (upper)
13.5 to 16.5 Ω
Float level is E (lower)
405.5 to 414.5 Ω
Fuel sender gauge assembly (for Fuel Sub Tank)
Standard resistance
Tester Connection
Condition
Specified Condition
2 - 3
Float level is F (upper)
12 to 18 Ω
Float level is E (lower)
405 to 415 Ω
← SERVICE DATA (Sep 2011 – Dec 2011)TORQUE SPECIFICATIONS (Sep 2011 – Dec 2011) →