SERVICE DATA
Specifications · Vehicles built from Sep 2011
| Fuel pressure |
Standard fuel pressure |
at idle |
281 to 287 kPa (2.87 to 2.93 kgf/cm2, 41 to 42 psi) |
| remains for 5 minutes after engine has stopped |
147 kPa (1.5 kgf/cm2, 21 psi) or more |
||
| Fuel injector |
Standard resistance |
20°C (68°F) |
11.6 to 12.4 Ω |
| Standard Injection volume |
87 to 105 cm3 (5.3 to 6.4 cu in.) per 15 seconds |
||
| Difference between each cylinder |
18 cm3 (1.1 cu in.) or less |
||
| Fuel leakage |
1 drop or less per in 12 minutes |
||
| Fuel pump |
Standard resistance |
20°C (68°F) |
0.2 to 3.0 Ω |
| Fuel sender gauge assembly |
Standard resistance |
Float level is F (upper) |
13.5 to 16.5 Ω |
| Float level is E (lower) |
405.5 to 414.5 Ω |
||
| Fuel sender gauge assembly (for Fuel Sub Tank) |
Standard resistance |
Float level is F (upper) |
12 to 18 Ω |
| Float level is E (lower) |
405 to 415 Ω |
||