REMOVAL
Removal / installation · Vehicles built from Jan 2012
| 1. REMOVE UPPER RADIATOR SUPPORT SEAL |
Remove the 7 clips and radiator support seal.


| 2. REMOVE FRONT BUMPER WINCH COVER SUB-ASSEMBLY (w/ Winch) |
| 3. REMOVE RADIATOR GRILLE ASSEMBLY |
Put protective tape around the radiator grille assembly.

Text in Illustration *1
Protective Tape
Remove the 3 screws.
Detach the 2 clips and 8 claws, and remove the radiator grille assembly.
w/ Wide View Front Monitor System:
Disconnect the connector.
| 4. REMOVE FRONT TELEVISION CAMERA ASSEMBLY |
Remove the 3 screws.

Detach the 2 guides and remove the front television camera assembly.
