U0126 Steering Sensor Communication
Diagnostic trouble codes · Vehicles built from Jan 2012
Also covers:
- U0129 Lost Communication with Brake System Control Module
- U0130 Lost Communication with Steering Effort Control Module
- U0140 Lost Communication with Body Control Module
DESCRIPTION
These DTCs are stored if there is a malfunction in the CAN communication system connected to the multi-media module receiver assembly.- HINT:
- If CAN communication system DTCs are stored, they may also be stored in other systems.
| DTC Code |
DTC Detection Condition |
Trouble Area |
| U0126 |
Lost communication with steering angle sensor |
CAN communication system |
| U0129 |
Lost communication with brake system control module |
|
| U0130 |
Lost communication with steering effect control module |
|
| U0140 |
Lost communication with body control module |
INSPECTION PROCEDURE
| 1. CHECK FOR DTC |
Clear the DTCs.
- for LHD: Click here
- for RHD: Click here
- for LHD: Click here
Check for DTCs.
- for LHD: Click here
- for RHD: Click here
Result Result
Proceed to
CAN DTCs are not output
A
DTCs are output (for LHD)
B
DTCs are output (for RHD)
C
- for LHD: Click here
- HINT:
- If CAN communication system DTCs are stored, they may also be stored in other systems.
- If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.
- If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs.
- for LHD: Click here
- for RHD: Click here
- If CAN communication system DTCs are stored, they may also be stored in other systems.
|
|
||||
|
|
||||
| A | ||
| ||
