2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

INITIALIZATION

Troubleshooting · Vehicles built from Jan 2012


INITIALIZE SIDE MONITOR SYSTEM
  1. When "System initializing" is displayed on the multi-display assembly, correct the steering angle neutral point using the following method.

    1. Fully turn the steering wheel to the right and left on the flat ground.

      NOTICE:
      Memorizing the steering angle neutral point must be carried out with the engine started. Apply the parking brake, depress the brake pedal, move the shift lever to P and make sure that the vehicle is not moving.

      HINT:
      "?" button is displayed at the same time as "System initializing". If the "?" button is selected, this method is displayed.

← HOW TO PROCEED WITH TROUBLESHOOTING (from Jan 2012)CALIBRATION (from Jan 2012) →