2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built from Sep 2011

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL TRANSPONDER KEY AMPLIFIER

  1. E234231
    Connect the connector.

  1. Align the claw of the transponder key amplifier with the upper bracket.

  1. Push in the transponder key amplifier and install it to the upper bracket.

    NOTICE:
    Do not push in the transponder key amplifier with excessive force as it may be damaged.


2. INSTALL UPPER STEERING COLUMN COVER

  1. C179482
    Attach the claw to install the upper steering column cover.

  1. Attach the 4 clips to install the upper steering column cover onto the instrument cluster finish panel.


3. INSTALL LOWER STEERING COLUMN COVER

  1. C179481
    Attach the 2 claws to install the lower steering column cover.

    NOTICE:
    Do not damage the tilt and telescopic switch.

  1. Install the 3 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }

← INSPECTION (from Sep 2011)COMPONENTS (from Sep 2011) →