USB Audio System Recognition/Play Error
Circuit diagnosis · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
INSPECTION PROCEDURE
- HINT:
- When a large amount of data is in a USB device, it may take a while before play begins.
- When using a USB device, files that are copy protected or encrypted by copyright cannot be played.
- When files are not played in the sorted order, perform the following procedure before inspection.
- Add numbers in front of the file names.
- Put the files in a folder and copy the folder data to the USB device.
- When a large amount of data is in a USB device, it may take a while before play begins.
| 1. CHECK USB DEVICE OR "iPod" |
Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
Check if playable files are present on the USB device or "iPod".
- HINT:
- Refer to System Description for playable files (Click here).
Check if the USB device is a compatible format or "iPod" is a compatible version.
- HINT:
- Refer to System Description for compatible formats and versions (Click here).
Result Result
Proceed to
No playable files exist, or incompatible device format or version
A
Playable files exist, and compatible device format or version
B
|
|
||||
| A | ||
| ||
| 2. FORMAT USB DEVICE OR RESTORE "iPod" AND RECHECK |
Delete all files in the USB device or "iPod" and format/restore it.
Save the data again and check if it can be played on the in-vehicle device.
- NOTICE:
- Formatting a USB device or restoring an "iPod" erases all music on the device.
- Ensure that backup music data is available before performing this operation.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
| 3. REPLACE USB DEVICE OR "iPod" |
Turn the engine switch off.
- HINT:
- When this malfunction occurs, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the engine switch on (ACC).
Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
- HINT:
- If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.
- Refer to System Description for compatible formats and versions (Click here).
- If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.
| NEXT | |
| 4. CHECK USB DEVICE OR "iPod" |
Check if USB device or "iPod" is recognized by the radio receiver assembly, or if information such as track, artist and album names are displayed on screen.
- OK:
- USB device or "iPod" is recognized or track information such as track, artist and album names are displayed.
|
|
||||
| OK | ||
| ||
