Communication Access Failed
Circuit diagnosis · Vehicles built from Jan 2012
INSPECTION PROCEDURE
| 1. CHECK PROBLEM SYMPTOM |
Perform procedures indicated by the displayed message and check that the problem symptom recurs.
Displayed Message
Cause
Check Item
A message is displayed indicating to try again after waiting for a while because the information cannot be retrieved due to a busy line, etc.
- Other communication error
- Cellular phone carrier is different from the setting
- Excessive number of retries to access
- PPP certification error
- Error other than PPP certification
- No available sockets
- No response from the G-BOOK center for a certain period of time after a request is sent
- HTTP error
Wait for a while, perform the operation again and check if the problem symptom recurs.*
A message is displayed continuously indicating to try again after moving the vehicle because the center cannot be accessed, as the screen cannot be displayed due to a busy line, etc.
A message is displayed indicating to check the cellular phone every time the phone is connected.
- Improper setting of the cellular phone
- No available cellular phone number (e.g. no SIM card installed)
Check that a call can be made using the cellular phone, perform the operation again and check if the problem symptom recurs.
A message is displayed indicating that a cellular phone is not connected.
No cellular phone is connected
Reregister the cellular phone, perform the operation again and check if the problem symptom recurs.
A message is displayed indicating to move the vehicle to a communication service area as it is outside a service area.
- Vehicle is outside the communication service area
- Service becomes unavailable during communication
Move the vehicle to a communication service area, perform the operation again and check if the problem symptom recurs.
- HINT:
- *: If this message is temporarily displayed, there is a problem with the radio wave signal conditions or the base station was busy. This is not a malfunction (convince the customer that this is not a malfunction and ask them to use the system as is).
- Other communication error
| NEXT | |
| 2. MOVE VEHICLE |
Move the vehicle.
If the vehicle is outside the communication service area, move the vehicle to a communication service area, wait for a while and perform the operation again.
Result Result
Proceed to
System does not return to normal.
A
System returns to normal.
B
|
|
||||
| A | |
| 3. CHECK CELLULAR PHONE MODEL |
Check the cellular phone model.
Check that the cellular phone has both "Bluetooth" and Internet connection functions.
- OK:
- The cellular phone has both "Bluetooth" and Internet connection functions.
- HINT:
- If the cellular phone does not have either a "Bluetooth" function or an Internet connection function, inform the customer about it.
|
|
||||
| OK | |
| 4. CHECK "Bluetooth" SETTING PROCEDURE |
Check "Bluetooth" setting procedure.
Check that the "Bluetooth" cellular phone has been registered correctly.
- OK:
- The "Bluetooth" cellular phone has been registered correctly.
- HINT:
- When using the hands-free function of a "Bluetooth" phone, it is necessary to register the phone as a "Bluetooth" phone. Although the audio function of a cellular phone with the "Bluetooth" portable audio function may have already been registered, separate hands-free registration is required.
|
|
||||
| OK | |
| 5. REPLACE CELLULAR PHONE AND RECHECK |
Obtain the customer's consent and connect another "Bluetooth" compatible cellular phone.
- HINT:
- Register and connect the "Bluetooth" cellular phone referring to the owner's manual.
Check the connection to G-BOOK.com.
Result Result
Proceed to
G-BOOK.com cannot be accessed.
A
G-BOOK.com can be accessed.
B
- HINT:
- If the customer's cellular phone has a problem, ask the customer to check the phone.
- After this step has been completed, clear the cellular phone registered in this step.
- If the customer's cellular phone has a problem, ask the customer to check the phone.
|
|
||||
| A | ||
| ||
