REMOVAL
Removal / installation · Vehicles built from Jan 2012
| 1. REMOVE V-BANK COVER SUB-ASSEMBLY |
Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

Text in Illustration *1
Grommet
*2
Pin
*3
Hook
*4
Bracket
| 2. DISCONNECT NO. 2 AIR INJECTION SYSTEM HOSE |
Disconnect the connector.

Disconnect the No. 2 air injection system hose.
| 3. REMOVE AIR SWITCHING VALVE ASSEMBLY |
Remove the bolt and then disconnect the wire harness clamp bracket.

Remove the 2 bolts.

Remove the 3 bolts, air switching valve and gasket.

- NOTICE:
- Be careful not to damage the installation surface of the gasket.
