2011-2013 Land Cruiser · Service Manual Vehicle Exterior

ADJUSTMENT

Removal / installation · Vehicles built from Sep 2011


1. ADJUST REAR WASHER NOZZLE

  1. B283560
    Using a screwdriver, adjust the direction of the rear washer nozzle.

    NOTICE:
    Do not use a safety pin or other pointed tools. Doing so may damage the inside of the washer nozzle.

    HINT:
    Use a thin-bladed screwdriver with an approximately 1 mm (0.0394 in.) thick tip.

← REMOVAL (from Sep 2011)INSTALLATION (from Sep 2011) →