INSTALLATION
Removal / installation · Vehicles built from Sep 2011
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL LOWER CONSOLE BOX |
![]() ![]() |
Attach the 2 claws to install the lower console box.
Install the 2 screws and 4 bolts.
| 2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() ![]() |
Attach the 8 claws to install the upper console panel sub-assembly.
| 3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() ![]() |
Install the shift lever knob and twist it in the direction indicated by the arrow.
| 4. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
Attach the 12 claws to install the rear upper console panel sub-assembly.


| 5. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH |
Attach the 8 claws to install the upper No. 2 console panel garnish.


Text in Illustration *A
for Separate Seat Type
*B
for Bench Seat Type
| 6. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH |
![]() ![]() |
Attach the 8 claws to install the upper No. 1 console panel garnish.
| 7. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
![]() ![]() |
Connect the connectors.
Attach the 7 claws to install the lower center instrument cluster finish panel sub-assembly.
| 8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH |
![]() ![]() |
Connect the connectors and attach the 2 clamps.
Attach the 8 claws to install the lower instrument panel pad sub-assembly.
Install the clip and screw.
| 9. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION |
![]() ![]() |
Attach the 7 claws to install the No. 2 instrument panel finish panel cushion.
| 10. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH |
![]() ![]() |
Attach the 7 claws to install the lower instrument panel pad sub-assembly.
Install the clip and screw.
| 11. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION |
![]() ![]() |
Attach the 7 claws to install the No. 1 instrument panel finish panel cushion.
| 12. INSTALL FRONT SEAT ASSEMBLY RH |









