With the back door opening side reinforcement cut and join replacement sections removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Remove Weld Points |
|
Remove Weld Points |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
|
Plug Weld |
|
Plug Weld |
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
| *1 | ROOF SIDE PANEL INNER REAR | *2 | ROOF SIDE EXTENSION OUTER |
| *A | w/ Rear No. 2 Seat | - | - |
| *1 | SEAT BELT ANCHOR REINFORCE NO.1 UPPER | - | - |
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.