With the quarter panel extension cut and join replacement sections removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Cut and Join Location |
| *a | 40 mm (1.57 in.) | - | - |
| *A | LH | *B | RH |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
|
Butt Weld |
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
| *1 | QUARTER PANEL REINFORCEMENT | - | - |
| *A | LH | *B | RH |
| *1 | ROOF SIDE REINFORCEMENT BRACKET | *2 | BACK DOOR STOPPER RETAINER LOWER |
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.