Home › Vehicle Exterior › BODY PANEL › QUARTER WHEEL HOUSING OUTER PANEL › from 2021.07
BM38G0E _01 Vehicle Exterior _101965 BODY PANEL _0472901 QUARTER WHEEL HOUSING OUTER PANEL F

BODY PANEL  QUARTER WHEEL HOUSING OUTER PANEL  ASSEMBLY REPLACEMENT  


K161935

With the quarter panel cut and join replacement sections removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location

a.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K161658C01
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A LH - -
K108837

Adhesive - -



b.

After removing the A, remove the quarter wheel house panel outer.

HINT:

A is reused.


K161659C01
2.281,2.823 2.667,3.167 2.667,3.167 2.833,3.167 false 2.917,3.083 3.229,3.24 0.313,0.156 10 false A 0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A LH - -



c.

Be careful when cutting as foamed sealing material is located near the cutting position.

K161660C01
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A LH - -
K108840

Foamed Sealing Material - -



d.

Remove the quarter window lock gusset plate sub-assembly.

K161661C01
1.833,2.167 2,2.167 2,2.167 2.5,2.583 false 2.167,1.469 2.479,1.667 0.313,0.198 10 false *a 1.667,2.083 1.979,2.281 0.313,0.198 10 false *1 0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A LH - -
*1 QUARTER WINDOW LOCK GUSSET PLATE SUB-ASSEMBLY - -
*a 170 mm (6.69 in.) - -



e.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K161662C01
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A LH - -
K108837

Adhesive - -



f.

Remove the quarter wheel house panel outer.

K161663C01
3.125,3.135 3.5,4 3.5,4 3.667,4 false 3.74,3.917 4.052,4.115 0.313,0.198 10 false *1 0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A LH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -



g.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K161664C01
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A RH - -
K108837

Adhesive - -



h.

After removing the A, remove the quarter wheel house panel outer.

HINT:

A is reused.


K161665C01
5,2.833 4.5,3.167 4.5,3.167 4.333,3.167 false 4.167,3.094 4.479,3.25 0.313,0.156 10 false A 0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A RH - -



i.

Be careful when cutting as foamed sealing material is located near the cutting position.

K161666C01
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A RH - -
K108840

Foamed Sealing Material - -



j.

Remove the quarter window lock gusset plate sub-assembly.

K161667C01
4.75,2.583 5.25,2.167 5.25,2.167 5.417,2.167 false 4.854,1.469 5.167,1.667 0.313,0.198 10 false *a 5.5,2.083 5.813,2.281 0.313,0.198 10 false *1 0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A RH - -
*1 QUARTER WINDOW LOCK GUSSET PLATE SUB-ASSEMBLY - -
*a 170 mm (6.69 in.) - -



k.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K161668C01
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A RH - -
K108837

Adhesive - -



l.

Remove the quarter wheel house panel outer.

K161669C01
3.583,4.031 3.75,4.031 3.75,4.031 4.083,3.167 false 3.406,3.938 3.719,4.135 0.313,0.198 10 false *1 0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A RH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -




INSTALLATION


Symbol Meaning
K108821

Spot Weld
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108831

Butt Weld
K108835

Assembly Mark

a.

For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

K161670C01
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A LH - -



b.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K161662C01
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A LH - -
K108837

Adhesive - -



c.

Weld the quarter wheel house panel outer to the vehicle side.

K161671C03
3.417,4.427 3.25,4.667 3.25,4.667 3.083,4.667 false 2.875,4 2.75,4 2.75,4 2.625,4.417 false 4.552,4.135 4.75,4.667 4.75,4.667 4.917,4.667 false 3.729,2.667 4.042,4 4.042,4 4.208,4 false 3,2.792 2.5,3.917 2.5,3.917 2.333,3.917 false 0.156,0.156 0.469,0.354 0.313,0.198 10 false *A 5,4.583 5.313,4.781 0.313,0.198 10 false *1 2.917,4.583 3.229,4.781 0.313,0.198 10 false *3 2.938,3.917 3.25,4.115 0.313,0.198 10 false *3 4.24,3.896 4.552,4.094 0.313,0.198 10 false *4 2.167,3.833 2.479,4.031 0.313,0.198 10 false *2 0.156,0.365 0.469,0.563 0.313,0.198 10 false *B
*A for Type A *B LH
*1 QUARTER WHEEL HOUSE PANEL OUTER *2 SEAT BELT ANCHORAGE TO QUARTER WHEEL HOUSE REINFORCE
*3 QUARTER PANEL EXTENSION UPPER REAR *4 QUARTER PANEL REINFORCEMENT UPR


K162740C02
0.25,4.917 0.417,4.917 0.417,4.917 0.5,5.458 false 4.552,4.135 4.75,4.667 4.75,4.667 4.917,4.667 false 3.729,2.667 4.042,4 4.042,4 4.208,4 false 3,2.792 2.5,3.917 2.5,3.917 2.333,3.917 false 1.25,4.917 1.417,4.917 1.417,4.917 1.5,5.333 false 3.25,4.917 3.083,4.917 3.083,4.917 2.104,5.615 false 2.646,6.198 2.417,6.75 2.417,6.75 2.25,6.75 false 2.083,4.667 1.917,4.667 1.917,4.667 1.615,5.583 false 0.156,0.156 0.469,0.354 0.313,0.198 10 false *A 5,4.583 5.313,4.781 0.313,0.198 10 false *1 2.135,4.604 2.448,4.802 0.313,0.198 10 false *3 0.083,4.865 0.396,5.063 0.313,0.198 10 false *3 4.24,3.906 4.552,4.104 0.313,0.198 10 false *7 2.167,3.833 2.479,4.031 0.313,0.198 10 false *2 0.156,0.365 0.469,0.563 0.313,0.198 10 false *B 1.073,4.854 1.385,5.052 0.313,0.198 10 false *4 3.323,4.833 3.635,5.031 0.313,0.198 10 false *5 2.073,6.688 2.385,6.885 0.313,0.198 10 false *6
*A for Type B *B LH
*1 QUARTER WHEEL HOUSE PANEL OUTER *2 SEAT BELT ANCHORAGE TO QUARTER WHEEL HOUSE REINFORCE
*3 QUARTER PANEL EXTENSION UPPER REAR *4 QUARTER WHEEL HOUSE PAD INNER
*5 QUARTER WHEEL HOUSE PAD INNER FRONT *6 REAR WHEEL BRACKET
*7 QUARTER PANEL REINFORCEMENT UPR - -



d.

Weld the quarter window lock gusset plate sub-assembly to the vehicle side.

K161672C01
2.479,2.573 2,2.167 2,2.167 1.833,2.167 false 0.156,0.156 0.469,0.354 0.313,0.198 10 false *A 1.667,2.083 1.979,2.281 0.313,0.198 10 false *1
*A LH - -
*1 QUARTER WINDOW LOCK GUSSET PLATE SUB-ASSEMBLY - -



e.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K161658C01
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A LH - -
K108837

Adhesive - -


K161673C01
0.104,0.104 0.417,0.302 0.313,0.198 10 false *A
*A LH - -



f.

For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

K161674C01
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A RH - -



g.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K161668C01
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A RH - -
K108837

Adhesive - -



h.

Weld the quarter wheel house panel outer to the vehicle side.

K161675C01
2.635,4.135 2.5,4.667 2.5,4.667 2.333,4.667 false 4.125,4.729 3.958,4.729 3.958,4.729 3.792,4.448 false 4.604,4.396 4.5,4 4.5,4 4.333,4 false 4.917,4 4.75,4 4.75,4 4.25,2.833 false 0.156,0.156 0.469,0.354 0.313,0.198 10 false *A 4.167,4.635 4.479,4.833 0.313,0.198 10 false *3 4.167,3.917 4.479,4.115 0.313,0.198 10 false *3 2.167,4.583 2.479,4.781 0.313,0.198 10 false *1 5.021,3.917 5.333,4.115 0.313,0.198 10 false *2
*A RH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER *2 SEAT BELT ANCHORAGE TO QUARTER WHEEL HOUSE REINFORCE
*3 QUARTER PANEL EXTENSION UPPER REAR - -



i.

Weld the quarter window lock gusset plate sub-assembly to the vehicle side.

K161676C01
4.75,2.583 5.167,2.167 5.167,2.167 5.333,2.167 false 0.156,0.156 0.469,0.354 0.313,0.198 10 false *A 5.417,2.083 5.729,2.281 0.313,0.198 10 false *1
*A RH - -
*1 QUARTER WINDOW LOCK GUSSET PLATE SUB-ASSEMBLY - -



j.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K161664C01
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A RH - -
K108837

Adhesive - -


K161677C01
0.104,0.104 0.417,0.302 0.313,0.198 10 false *A
*A RH - -



k.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)


l.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.