Home › Vehicle Exterior › BODY PANEL › ROCKER OUTER PANEL › from 2022.11
BM38G0E _01 Vehicle Exterior _101965 BODY PANEL _0472898 ROCKER OUTER PANEL F

BODY PANEL  ROCKER OUTER PANEL  CUT AND JOIN REPLACEMENT SECTIONS  


K161931

REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108827

Cut and Join Location
K108828

Cut Location for Supply Parts

K172114C01
2.698,3.885 3.01,4.042 0.313,0.156 10 false *a
*a 70 mm (2.76 in.) - -


K161572


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108831

Butt Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K172115C01
2.594,4.365 2.917,3.833 2.917,3.833 3.083,3.833 false 3.135,3.771 3.448,3.927 0.313,0.156 10 false *1
*1 CENTER BODY PILLAR OUTER - -



c.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.