FUNCTION
"Bluetooth" is a worldwide wireless communication standard widely used as a short range communication tool.
| *1 | Audio Head Unit (Radio Receiver Assembly) (Built-in "Bluetooth" Antenna) |
- | - |
| *a | The illustrations shown are examples only. | *b | Cellular Network |
| *c | Cellular Phone ("Bluetooth" Compatible Type) |
*d | Portable Audio Player ("Bluetooth" Compatible Type) |
| *e | "Bluetooth" Wireless Connection | - | - |
"Bluetooth" is a trademark owned by Bluetooth SIG, Inc.
"Bluetooth" is a wireless connection technology that uses the 2.4 GHz frequency band.
The communication performance of "Bluetooth" may vary depending on obstructions or radio wave conditions between communication devices, electromagnetic radiation, communication device sensitivity or antenna capacity.
|
The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. |
Hands-free Function
The "Bluetooth" built-in audio head unit and a "Bluetooth" compatible cellular phone* can be connected using a "Bluetooth" wireless connection. This enables the use of the hands-free function on the cellular phone even if the phone is in a pocket or bag. For this reason, it is not necessary to use a connector or cable to connect the cellular phone.
*: Some versions of "Bluetooth" compatible cellular phones may not function properly.
Compatible Hands-free Devices
| Required "Bluetooth" Specifications | Ver. 2.0 or higher (Ver. 4.1 + EDR or higher recommended) |
| Compatible Profiles |
·
HFP (Hands Free Profile) Ver. 1.0 or higher (Ver. 1.7 or higher recommended)
·
OPP (Object Push Profile) Ver. 1.1 or higher (Ver. 1.2 or higher recommended)
·
PBAP (Phone Book Access Profile) Ver. 1.0 or higher (Ver. 1.2 or higher recommended) |
| Maximum number of hands-free devices that can be registered (including audio devices) | 5 |
The amount of remaining battery charge displayed on the audio head unit may be different from that of the "Bluetooth" device.
"Bluetooth" Audio Function
The "Bluetooth" built-in audio head unit and a "Bluetooth" compatible portable audio player* can be connected using a "Bluetooth" wireless connection. This enables files stored in the portable audio player to be heard from the vehicle speakers. In addition, operations such as play/stop can be performed directly from the audio head unit.
*: Some versions of "Bluetooth" compatible audio players may not be able to be connected via the "Bluetooth" function, or music may play, but functions available using the audio head unit may be limited.
Compatible "Bluetooth" Audio Devices
| Required "Bluetooth" Specifications | Ver. 1.1 or higher (Ver. 4.1 or higher recommended) |
| Compatible Profiles |
·
A2DP (Advanced Audio Distribution Profile) Ver. 1.0 or higher (Ver. 1.3 or higher recommended)
·
AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver. 1.6 or higher recommended) |
| Maximum number of audio devices that can be registered (including hands-free devices) | 5 |