FUNCTION
USB Audio System Function
The No. 1 stereo jack adapter assembly is equipped with a USB terminal. Connecting a USB device or "iPod" to the No. 1 stereo jack adapter assembly allows music files to be played. Not only is it possible to play music from a USB device with audio functions, is also possible to play MP3, WMA or AAC music files that are stored on a USB device. In addition, "iPod" control software is installed, allowing file selection from playlists and operation using shuffle mode.
Operation through the controls of a USB device or some "iPod" generation cannot be performed while it is connected.
USB Audio System Compatible Devices
USB Device
The following device formats can be used:
| Compatible USB device formats |
·
USB communication format: USB 2.0 FS (12MBPS)
·
File format: FAT16/32 (Windows)
·
Class: Mass storage class |
MP3 and WMA files written in any format other than those listed above may not play correctly, and their names and folder names may not be displayed correctly.
Items related to standards and limitations are as follows:
Maximum directory hierarchy: 8 levels
Maximum number of folders in device: 3000 (including the root folder)
Maximum number of files in device: 9999
Maximum number of files per folder: 255
"iPod"
"iPhone", "iPod", "iPod touch" and "iPod nano" are trademarks of Apple Inc., registered in the U.S. and other countries.
The following "iPhone", "iPod touch" and "iPod nano" devices can be used with this system.
Made for:
"iPhone 7"
"iPhone 7 Plus"
"iPhone SE"
"iPhone 6s"
"iPhone 6s Plus"
"iPhone 6"
"iPhone 6 Plus"
"iPhone 5s"
"iPhone 5c"
"iPhone 5"
"iPhone 4S"
"iPod touch" (6th generation)
"iPod touch" (5th generation)
"iPod nano" (7th generation)
Depending on differences between models or software versions etc., some models might be incompatible with this system.
"iPod video" is not supported.
File Information
Playable MP3 File Standards
| Compatible Standard | MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3) |
| Compatible Sampling Frequency |
·
MPEG1 LAYER3: 32, 44.1, 48 (kHz)
·
MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz) |
| Compatible Bit Rate |
·
MPEG1 LAYER3: 32 to 320 (kbps)
·
MPEG2 LSF LAYER3: 8 to 160 (kbps)
·
Compatible with VBR |
| Compatible Channel Mode | Stereo, joint stereo, dual channel, monaural |
Playable WMA File Standards
| Compatible Standard | WMA Ver. 7, 8, and 9 |
| Compatible Sampling Frequency | 32, 44.1, 48 (kHz) |
| Compatible Bit Rate (Only Compatible with 2-channel Playback) |
·
Ver. 7, 8: CBR48 to 192 (kbps)
·
Ver. 9: CBR48 to 320 (kbps)
·
Compatible with VBR |
Playable AAC File Standards
| Compatible Standard | MPEG4/AAC-LC |
| Compatible Sampling Frequency | 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 (kHz) |
| Compatible Bit Rate (Only Compatible with 2-channel Playback) |
·
8 to 320 (kbps)
·
Compatible with VBR |
ID3 Tag, WMA Tag and AAC Tag
Additional text information called an ID3 tag can be input to MP3 files. Information such as song titles and artist names can be stored.
This player is compatible with ID3 tags of ID3 Ver. 1.0 and 1.1, and ID3 Ver. 2.2 and 2.3. (Number of characters complies with ID3 Ver. 1.0 and 1.1.)
Additional text information called a WMA tag can be input to WMA files. Information such as song titles and artist names can be stored.
Additional text information called an AAC tag can be input to AAC files. Information such as song titles and artist names can be stored.
Usable Media
Only CD-ROMs, CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) can be used to play MP3/WMA/AAC files.
CD-Rs and CD-RWs are more easily affected by a hot and humid environment than discs used for normal audio CDs. For this reason, some CD-Rs and CD-RWs do not play.
If there are fingerprints or scratches on a disc, the disc may not play or the disc may skip.
Some CD-Rs and CD-RWs may deteriorate if they are left in the cabin for a long time.
Keep CD-Rs and CD-RWs in an opaque case.
Usable Media Format
Usable media format
| Disc Format | CD-ROM Mode 1 and Mode 2, CD-ROM XA Mode 2 Form 1 and Form 2 |
| File Format | ISO9660 Level 1 and Level 2 (Joliet, Romeo) |
As for MP3/WMA/AAC files written in any unlisted format, the contents of the files may not be played normally or the file names or folder names may not be displayed correctly.
This player is compatible with multi-session discs and can play CD-Rs and CD-RWs on which MP3/WMA/AAC files have been added. However, only the first session can be played.
Discs whose first session includes both music data and MP3, WMA or AAC format data cannot be played.
Standards and Restrictions
| Maximum Directory Levels | 8 Levels |
| Maximum Number of Characters for a Folder Name/File Name | 32 Characters |
| Maximum Number of Folders | 192 (Including empty folders, root folders, and folders that do not contain MP3/WMA/AAC files) |
| Maximum Number of Files in a Disc | 255 (Including non-MP3/WMA/AAC files) |
File Names
Only files with an extension of ".mp3", ".wma" or ".m4a" can be recognized and played as MP3, WMA or AAC files.
Save MP3, WMA or AAC files with an extension of ".mp3", ".wma" or ".m4a".
If non-MP3, non-WMA or non-AAC files are saved with an extension of ".mp3", ".wma" or ".m4a", those files may be wrongly recognized as MP3, WMA or AAC files and played. A loud noise may occur and damage to the speaker may result.