FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
|
*1: Models with headup display *2: Models without FM-sub antenna *3: Models with FM-sub antenna *4: Models with Digital Audio Broadcast (DAB) tuner *5: Models without windshield defroster system *6: Models with windshield defroster system |
|
| Audio Head Unit (Radio and Display Receiver Assembly) |
·
Plays back audio from each audio source, such as radio.
·
Sends audio signals from each audio source to the speakers.
·
Sends each sound source and hands-free system status to the combination meter assembly or headup display*1.
·
Using the equipped 2.4 GHz frequency band wireless LAN, communicates via Wi-Fi with a wireless LAN access point, a tethering capable mobile phone or Wi-Fi mobile router. |
| Speakers | Output the audio sounds. |
| No. 1 Amplifier Antenna Assembly | Amplifies radio broadcasting signals (AM/FM*2/FM-main*3) from the radio antenna and sends them to the audio head unit. |
| No. 2 Amplifier Antenna Assembly*3 | Amplifies radio broadcasting signals (FM-sub) from the radio antenna and sends them to the audio head unit. |
| Digital Audio Broadcasting Antenna Assembly*4 | Amplifies DAB signals from the DAB antenna and sends them to the audio head unit. |
| Quarter Window Assembly RH (Window Glass Antenna Wire)
·
FM-sub*3
·
DAB*4 |
Receives radio broadcasting signals. (FM-sub/DAB*4) |
| Quarter Window Assembly LH (Window Glass Antenna Wire)
·
AM
·
FM*2
·
FM-main*3 |
Receives radio broadcasting signals. (AM/FM*2/FM-main*3) |
| Navigation Antenna Assembly*5
·
GPS |
Receives signals from GPS satellites and transmits these signals to the audio head unit. |
| Roof Antenna Assembly*6
·
GPS |
Receives signals from GPS satellites and transmits these signals to the audio head unit. |
| Steering Pad Switch Assembly | Sends operation signals from switches such as the volume switch, mode switch, seek switch and voice switch, to the audio head unit. |
| Telephone Microphone Assembly |
·
Detects voice during hands-free conversations and voice commands.
·
Is installed in the roof headlining and converts sound waves to an electrical signal and sends it to the audio head unit. |
| No. 1 Stereo Jack Adapter Assembly | When a USB memory device, portable audio player (USB type) or Apple device is connected, communicates with the audio head unit via USB. |
| Combination Meter Assembly |
·
Displays various information and operation signals on the multi-information display sent from the audio head unit via local bus communication.
·
Sends the vehicle speed signal to the audio head unit. |
| Headup Display (Meter Mirror Sub-assembly)*1 | Displays various information on the head up display sent from the audio head unit via local bus communication. |
DIAGNOSIS
For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.