Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for 7 Inch Display)
NM38G0E _56 Audio / Visual / Telematics _100511 AUDIO / VIDEO _0469455 AUDIO AND VISUAL SYSTEM(for 7 Inch Display) CO CONTROL F

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for 7 Inch Display)  CONTROL  AUDIO CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*: Models with headup display

Audio Head Unit (Radio and Display Receiver Assembly)
·

Plays back audio from each audio source, such as radio, CD/DVD and Bluetooth audio.

·

Sends audio signals from each audio source to the speakers.

·

Sends each sound source and hands-free system status to the combination meter assembly or headup display*.

·

Using the equipped 2.4 GHz frequency band wireless LAN, communicates via Wi-Fi with a wireless LAN access point, a tethering capable mobile phone or Wi-Fi mobile router.


Speakers Output the audio sounds.
No. 1 Amplifier Antenna Assembly Amplifies radio broadcasting signals (AM/FM-main) from the radio antenna and sends them to the audio head unit.
No. 2 Amplifier Antenna Assembly Amplifies radio broadcasting signals (FM-sub) from the radio antenna and sends them to the audio head unit.
Window Glass Antenna Wire (Rear RH)
·

FM-sub


Receives radio broadcasting signals. (FM-sub)
Window Glass Antenna Wire (Rear LH)
·

AM

·

FM-main


Receives radio broadcasting signals. (AM/FM-main)
Navigation Antenna Assembly
·

GPS


Receives signals from GPS satellites and transmits these signals to the audio head unit.
Steering Pad Switch Assembly Sends operation signals from switches such as the volume switch, mode switch, seek switch and voice switch, to the audio head unit.
Telephone Microphone Assembly
·

Detects voice during hands-free conversations and voice commands.

·

Is installed in the roof headlining and converts sound waves to an electrical signal and sends it to the audio head unit.


No. 1 Stereo Jack Adapter Assembly When a USB memory device, portable audio player (USB type) or Apple device is connected, communicates with the audio head unit via USB.
Combination Meter Assembly
·

Displays various information and operation signals on the multi-information display sent from the audio head unit via local bus communication.

·

Sends the vehicle speed signal to the audio head unit.


Headup Display (Meter Mirror Sub-assembly)* Displays various information on the head up display sent from the audio head unit via local bus communication.


DIAGNOSIS


a.

For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.