FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
|
*1: Models with stereo component amplifier assembly *2: Models without stereo component amplifier assembly *3: Models with multimedia system *4: Models with 6-speaker sound system *5: Models with 12.3-inch multi-display assembly |
|
| Stereo Component Equalizer Assembly |
·
Calculates the frequency of electronic control sounds and engine order component sound based on the vehicle speed, accelerator pedal depression amount, engine speed, generated torque and driving mode signals.
·
Generates the output sound quality based on the calculated frequency information and sends it to the stereo component amplifier assembly.*1
·
Generates the output sound quality based on the calculated frequency information and outputs control sounds to each speaker.*2 |
| No. 1 Active Noise Control Microphone | Detects muffled sounds in the cabin and sends signals to the stereo component equalizer assembly. |
| No. 2 Active Noise Control Microphone | |
| No. 3 Active Noise Control Microphone | |
| No. 4 Active Noise Control Microphone | |
| Stereo Component Amplifier Assembly*1 | Generates electronic control sounds based on signals from the stereo component equalizer assembly. |
| Front No. 1 Speaker Assembly (LH/RH) | Generates electronic control sounds based on signals from the stereo component amplifier assembly. |
| No. 1 Speaker with Box Assembly | |
| Radio and Display Receiver Assembly*3 | Sends audio signals to the stereo component equalizer assembly. |
| Radio Receiver Assembly*4 | |
| Radio Receiver Assembly*5 | Sends audio signals to the stereo component amplifier assembly. |
| ECM |
·
Outputs engine speed to the stereo component equalizer assembly.
·
Outputs the information such as the accelerator pedal depression amount, generated torque and the driving mode to the stereo component equalizer assembly. |
| Main Body ECU (Multiplex Network Body ECU) |
·
Sends driver seat and front passenger seat power window state signals to the stereo component equalizer assembly.
·
Outputs courtesy light switch signals to the stereo component equalizer assembly. |
| Brake Actuator Assembly
·
No. 2 Skid Control ECU |
Outputs vehicle speed signal to the stereo component equalizer assembly. |
| Central Gateway ECU (Network Gateway ECU) | Relays the signal between the CAN communication lines. |
| DLC3 | Can read the Diagnostic Trouble Codes (DTCs) of malfunctions by connecting the Techstream. |
SYSTEM CONTROL
Models with Stereo Component Amplifier Assembly
Based on the muffled sounds in the cabin detected by each active noise microphone and the vehicle condition signals from each ECU, the stereo component equalizer assembly calculates the control signals corresponding to respective speakers in the front No. 1 speaker assembly (RH), front No. 1 speaker assembly (LH) and No. 1 speaker with box assembly, and then sends the signals to the 3 speakers through the stereo component amplifier assembly.
The front No. 1 speaker assembly (RH), front No. 1 speaker assembly (LH) and No. 1 speaker with box assembly output electronic control sounds with an inverted phase to the muffled sounds, achieving muffled sound reduction.
Models without Stereo Component Amplifier Assembly
Based on the muffled sounds in the cabin detected by each active noise microphone and the vehicle condition signals from each ECU, the stereo component equalizer assembly calculates the control signals corresponding to respective speakers in the No. 1 speaker assembly (RH), No. 1 speaker assembly (LH) and No. 1 speaker with box assembly, and then outputs the signals to each speaker.
The No. 1 speaker assembly (RH), No. 1 speaker assembly (LH) and No. 1 speaker with box assembly output control sounds with an inverted phase to the muffled sounds to achieve a reduction in muffled sound.
DIAGNOSIS
If a system malfunction is detected, the stereo component equalizer assembly stores Diagnostic Trouble Codes (DTCs) in its memory. For details, refer to the Repair Manual.