SYSTEM CONTROL
Front Seat Heater System
When the front seat heater switch (refreshing seat switch) is turned on, the air conditioner amplifier assembly detects the temperature set by the front seat heater switch (refreshing seat switch) together with the temperature detected by the seat heater sensor in the front seat cushion heater, and depending on the conditions, regulates the temperature based on the settings by energizing the front seat heater.
If the ignition switch was turned off while the front seat heater was operating, the front seat heater resumes the operating conditions when the ignition switch is turned to ON.
| *A | Models with 12.3-inch Display | *B | Models without 12.3-inch Display |
| *1 | Multi-Display Assembly | *2 | Air Conditioning Control Assembly |
| *a | Front Seat Heater Switch LH | *b | Front Seat Heater Switch RH |
| *c | Indicator Light (Front Seat Heater Switch LH) | *d | Indicator Light (Front Seat Heater Switch RH) |
| *e | The illustration shown are examples only. | - | - |
Rear No. 1 Seat Heater System
When the rear seat heater switch RH/LH is pressed, the rear No. 1 seat heater system operates.
An indicator light is provided on the top part of the rear seat heater switch RH/LH, allowing the user to confirm the operation condition of the rear No. 1 seat heater.
| *1 | Cooler Control Switch Assembly | - | - |
| *a | Rear Seat Heater Switch LH | *b | Indicator Light (LH) |
| *c | Indicator Light (RH) | *d | Rear Seat Heater Switch RH |
| *e | The illustration shown are examples only. | - | - |